top of page
Go-Go Elite Traveller 2,  4-Wheel FDA Class II Medical Device*

Go-Go Elite Traveller 2, 4-Wheel FDA Class II Medical Device*

It's the FIRST 4-wheel scooter of its kind! With Pride's patented iTurn technology, the Go Go Elite Traveller 2 sets a new industry standard, offering 3-wheel turning ability without compromising classic 4-wheel stability.

  • Specifications

    CATEGORY SPECIFICATION
    Model

    Go Go Elite Traveller® 2 4-Wheel

    Model Number

    SC442E

    Turning Radius** 37"
    Overall Width of Base** 19.45"
    Overall Length** 39.37"-40.79"
    Maximum Speed* Up to 4.23 mph
    Ground Clearance 1.34" at transaxle, 3.15" at mid-neck
    Front Tires 2" x 7" solid
    Rear Tires 2.5" x 8" solid
    Seat-to-Ground Height Range 18.25"-20.25"
    Standard Seating Type: Mesh Back
    Material: Black Vinyl
    Width: 17"
    Depth: 17"
    Weight: 23 lbs.
    Product Weight 83 lbs. without batteries; 102.5 lbs. with 12 Ah batteries; 112.6 lbs. with 18 Ah batteries
    Total Weight with batteries 4-wheel: 83 lbs.
    Battery Requirements Two 12-volt, sealed lead-acid, non-spillable deep-cycle
    Maximum Range Per Charge* Up to 6.6 miles (12AH), up to 8.8 miles (12Ah) at 220 lbs., up to 10.4 miles (18AH), up to 13.8 miles (18Ah) at 220 lbs.
    Battery Charger Off-board 2A
    Drive System Rear-wheel drive, sealed transaxle, 24-volt DC motor
    Dual Braking System Regenerative and electromechanical
    Maximum Weight Capacity 300 lbs.
    Standard Body Colors Red and black interchangeable shroud panels
    Weight of Heaviest Piece** 35 lbs. (front section)
    Seat-to-Deck Height Range 16.38"-17.83"
    Battery Weight 9 lbs. each
    (Battery pack is 18 lbs. with 12AH batteries)
    14 lbs. each
    (18AH battery pack weighs 29.5 lbs.)
    Medicare Code Coverage K0800 - Group 1 Standard
    Warranty Lifetime limited on frame;
    2-year limited on Electronics;
    2-year limited on Drivetrain
  • Warranty

    Meeting and Exceeding High Standards for your Peace of Mind.

    Your Pride product has undergone thorough product testing to ensure safety, durability and performance.

    Our power chairs, scooters and lift chairs are Food & Drug Administration (FDA) approved medical products that require specific testing prior to release for public use.

    The testing requirements accepted by the FDA were developed by the American National Standards Institute/Rehabilitation Engineering & Assistive Technology Society of North America (ANSI/RESNA).

    The tests are conducted in accordance with the requirements of the ANSI/RESNA Test Standards and complement an additional stringent testing regiment developed by Pride's Research & Development Team.

    All products have passed, and in many cases, exceeded test criteria set forth, assuring the high level of quality synonymous with Pride.

    Some of the items our testing criteria include are:

    • Product Stability & Brakes Effectiveness Tests
    • Fatigue & Impact Strength Verification Tests
    • Overall Product Performance Verification
    • Dimensional Requirement Compliance
    • Product Durability & Reliability Testing
    • Material Protective Coating Testing Verification
    • Misuse and Abuse Testing
    • Ergonomic Verification
    • Environmental Testing for Adverse Weather Operation Conditions
    • Electronic Systems Performance and Durability
    • Chemical and Bio-Contamination Analysis Testing for Toxicity Verification
    • Cal 117 Flammability Test Compliance for Seating Foam and Fabric Components
    • UL94VO Flammability Testing for Compliance of Plastic Components
    • Electromagnetic Compatibility (EMC)

    Warranty

    • Lifetime limited warranty on frame
    • 2-year limited warranty on electronics
    • 2-year limited warranty on drivetrain

    https://www.pridemobility.com/pdf/resourcecenter/infinfb3056_us_all_scooters_english_sp_warranty_insert.pdf

     

bottom of page